SEKURE Paradox Spectra 1641 User Manual download pdf (Page 45)

44 User’s Manual

9.0 APPENDIX A

For Spectra 1689 LED Keypad only

Do not read the following if you have not read

these sections:

•User Access Codes (see section 3.4)

•System’s Clock (see section 5.4)

•Auto-Arm Time (see section 4.9)

After entering the 3-digit section you wish to program, the

[ARM1] and [STAY1] will flash. If a value is programmed, the

number corresponding to the first digit of the programmed

value will also illuminate. At this point, you can begin entering

the required data. After entering a digit, the number

corresponding to the following programmed digit will

illuminate and so forth. For example, if you wish to change

User Code 004 from 123456 to 454545, after entering section

[004], number [1] will turn on. Press the [4] button and

number [2] will turn on, then press the [5] button and number

[3] will turn on...

After entering the desired 3-digit section and before entering

any data, press the [ENTER] button to access the Data Display

Mode. The [ARM1] and [STAY1] Lights will illuminate. Once in

the Data Display Mode, pressing the [ENTER] button will scroll

through the digits of the current section and the [BYP], [MEM] &

[TRBL] Lights will flash. When viewing the last digit in the

section, pressing the [ENTER] button will automatically

advance to the next section. Press [CLEAR] to exit.

1 2 ... 40 41 42 43 44 45 46 47

No comments

SEKURE Paradox Spectra 1641 User Manual Page 45