SEKURE Paradox Esprit 616LED User's Guide download pdf (Page 14)

13 User Guide

No Movement Auto Arming

The alarm system can be programmed to arm the system and/or send a report to your monitoring station if no

zone activity occurs for a pre-programmed amount of time. This is a particularly useful feature when supervising

an individual with chronic health problems or for a person who lives alone. The system will bypass any open

zones.

Alarms

Alarm Display

If an alarm has occurred on a zone, the respective zone key will flash, the [MEM] key will light up, and the zones

will be stored in memory. These respective keys will continue to flash until disarming even if the zones are

restored. To exit this mode and switch to live display mode before disarming, press the [

CLEAR] key. When the

system is disarmed, the zone keys will turn off, while the [

MEM] key remains lit. Press the [MEM] key to illuminate

the key corresponding to the zones that were in alarm. The alarm memory will be erased when the next alarm

occurs and after a valid code is entered or upon full-arming the system.

Disarming & Deactivating an Alarm

To disarm an armed system or an alarm, press [OFF] and enter your [USER CODE]. An entry point, like the front

door, will be programmed with one of two Entry Delay Timers. When an entry point is opened, the keypad will

beep until you disarm the system. Your alarm system will not generate an alarm until this timer elapses. Any

user can disarm a partition they have been assigned to, except users assigned with the Arm Only Option or

PGM Only Option.

Panic Alarms

In case of an emergency, the system can provide three panic alarms that can immediately generate an alarm

after simultaneously pressing and holding two specific keys for three seconds. Based on your needs, these

panic alarms can generate audible alarms (sirens or bells) or silent alarms and can communicate specific

messages to your monitoring station. For instance, pressing [1] and [3] can mean “call the police” or anything

you require. This feature must be set by your installer.

Press and hold keys [1] and [3] for Panic type 1 (e.g. police).

Press and hold keys [4] and [6] for Panic type 2 (e.g. medical).

Press and hold keys [7] and [9] for Panic type 3 (e.g. fire).

How do I temporarily disable the Auto-Arm Timer?

Press the [] key.

2 Enter [

MASTER CODE].

3 Press the [

BYP] key. The [BYP] key will flash.

4 Press key [1] to set partition 1, or press key [2] to set partition 2.

5 Press and hold [

SLEEP] to temporarily disable the Auto-Arm Timer.

How do I disarm the system?

• Press [

OFF] + enter [USER CODE].

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

SEKURE Paradox Esprit 616LED User's Guide Page 14

Comments to this Manuals

Related products and manuals for Security access control systems SEKURE Paradox Esprit 616LED