SEKURE Paradox Esprit 616LED User's Guide download pdf (Page 6)

5 User Guide

Setting the Time & Date

Setting Chime Zones

A chime-enabled zone will advise you every time it is opened by causing your keypad to beep. Each keypad

must be chimed separately.

Trouble Display

Your alarm system continuously monitors several trouble conditions that can be reported directly to your

monitoring station. When a trouble condition occurs, the [

TBL] key will illuminate. Press the [TBL] key, and the

keypad will illuminate a number corresponding to the trouble the system is experiencing. We strongly suggest

that you inform your monitoring station of the trouble and allow them to service your system.

NOTE: If the keypad emits a

BEEP every 5 seconds whenever a new trouble condition has occurred, press the

[

TBL] key to stop the “Trouble Beep”.

Accessing the Trouble Display

How do I set the time & date?

1 Press the [

TBL] key.

2 Press [8].

3 Enter time using the 24 hour format (e.g. 18:00 for 6:00 pm).

4 Enter the year (4 digits).

5 Enter the month (2 digits).

6 Enter the day (2 digits). You have now set the time & date. Press [

CLEAR] to exit.

How do I chime zones?

• For K636 & K10LED keypads: press & hold the zone key ([1] to [0(10)]) you wish to chime.

For K32 & K32I keypads: press & hold the [T] key and enter the 2-digit zone number.

Confirmation beep = Chime on, Rejection beep = Chime off

Note: For a description of the confirmation and rejection beeps, see Keypad Feedback on page 6.

To identify your keypad, see page 7.

Key / LED

Lit

Trouble Type

Trouble Details

[2] Power Trouble (press [2] to view

the type of power trouble; the

corresponding key illuminate)

Three types of power trouble:

[1] The control panel is experiencing low/no battery.

[2] There is an AC failure on the control panel.

[3] There is an auxiliary overload on the control

panel.

[3] Bell Trouble There is a bell disconnect/overload on the control

panel.

Press

[

TBL]

[4] Communication Trouble Your alarm system, if monitored, could not

communicate with the monitoring station.

[5] Tamper/Zone Wiring Failure A wiring problem is occurring on one or more zones.

[6] Module Tamper Trouble A module’s anti-tamper switch has been triggered.

[8] Timer Loss Your alarm system’s clock must be reprogrammed.

See Setting the Time and Date above to set your

system’s time and date.

[0 (10)] Module Supervision Loss One or more modules are no longer communicating

with the control panel.

IMPORTANT: Except for the Timer Loss trouble, contact your monitoring station or installer to resolve

the trouble condition.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

SEKURE Paradox Esprit 616LED User's Guide Page 6

Comments to this Manuals

Related products and manuals for Security access control systems SEKURE Paradox Esprit 616LED