SEKURE DGP2-648 User Manual download pdf (Page 11)

Digiplex 848/DigiplexNE LED Keypads 9n

5.0 ARMING

When the system is armed, it will respond to any breach in the zones

according to the way each zone is programmed. For example, if

someone opens a window that is armed, the system can trigger an

alarm and alert your security company.

5.1 EXIT DELAY TIMER

Arming the system will start the Exit Delay Timer. This will provide

enough time for you to exit the protected area before the system

arms. The Status light will flash green while the time elapses. The

timer can be assigned different time limits and the keypad can be

programmed to beep while the time elapses on the timer.

5.2 REGULAR ARMING

This method is used for everyday arming of the system. All zones

within the protected area must be closed to arm the system. To check

the status of the zones in each area, refer to Area Display on page 7.

Use One-Touch keys (see section 5.6) or a keyswitch to arm

the area (see section 5.7).

How do I Regular Arm the system?

1) Enter your [Access Code]. Your keypad will emit a Confirmation

Beep. The A

CCESS action light will flash.

2) Press the [Arm] key. If you have access to more than one area,

press the number key representing the area you want to arm or

press the [0] key for all assigned areas. After the Confirmation

Beep, the Exit Delay Timer will begin.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

No comments

SEKURE DGP2-648 User Manual Page 11