SEKURE DGP2-648 User Manual download pdf (Page 36)

34 User’s Manual

11.0 FIRE AND BURGLAR ALARMS

11.1 STANDARD FIRE ZONE

During a fire alarm, the bell/siren will emit an intermittent sound

(

BEEP-BEEP-BEEP) until silenced or reset. If the zone is a standard Fire

Zone, the system can immediately send an alert to your security

company.

The Fire Zone may reset itself once the problem has

cleared. If it does not, simultaneously press and hold

the [Clear] and [Enter] keys for two seconds or speak to

your installer.

11.2 DELAYED FIRE ZONE

During a delayed fire alarm, the bell/siren will emit an intermittent

sound (

BEEP-BEEP-BEEP) until silenced or reset. If the zone is a

delayed Fire Zone, there is an automatic delay before the system

contacts the security company (see figure 2 on page 37). This will

prevent unnecessary reporting of false alarms.

If you are unable to cancel the fire alarm, the system will

send an alert (if connected). Call your security company to

advise them of the false alarm.

How do I disarm the system if it was accidentally triggered?

1) Enter your [Access Code].

2) Call your security company quickly to advise them of the false

alarm.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

SEKURE DGP2-648 User Manual Page 36