SEKURE DGP2-648 User Manual download pdf (Page 8)

6 User’s Manual

2.2.2 CONFIDENTIAL MODE

The installer can program your keypad not to display the status of

your system by changing the keypad from Normal Mode to

Confidential Mode. This occurs when your keypad has been inactive

for a period of time defined by your installer. In Confidential Mode all

the indicator lights will turn off. Depending on how your keypad was

programmed by your installer, you must either press a key or enter

your User Access Code to activate Normal Mode.

2.2.3 MULTIPLE-ACTION

If your installer has enabled this feature, your keypad will permit you

to complete more than one action without having to reenter your User

Access Code. Press the

[Clear] key to exit the User Menu.

2.2.4 ILLUMINATION

You can adjust the illumination behind the keys to suit your

needs.

How do I adjust the illumination level?

1) Enter your

[Access Code]. Your keypad will emit a Confirmation

Beep. The A

CCESS action light will flash.

2) Press the [6] key. Your keypad will emit a Confirmation Beep, the

Prg action light will illuminate and the numerical light for the

current setting will illuminate.

3) Use the

[U] and [V] keys to increase or decrease the

illumination. The range is between numerical light 1 to 8 (1 being

the lowest and 8, the brightest).

4) Press the [Enter] key to save and exit.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

SEKURE DGP2-648 User Manual Page 8