SEKURE DGP2-648 User Manual download pdf (Page 29)

Digiplex 848/DigiplexNE LED Keypads 27n

8.0.1 GROUP [1]: SYSTEM

Trouble [1]: AC Failure

This means that your system is running on the backup battery. The

AC light on your keypad will be turned off during a power failure. If

this trouble occurs when your establishment is not experiencing a

power failure, call your security company for repairs.

Trouble [2]: Battery Trouble

This means the backup battery is disconnected or needs to be

recharged or replaced.

Trouble [3]: AUX Current Limit

Devices connected to the system have exceeded current limits. The

auxiliary output will shutdown until the troubled has been rectified.

Trouble [4]: Bell Current Limit

The bell of siren connected to the system has exceeded current

limits. The bell/siren output will shutdown until the trouble is rectified.

Trouble [5]: Bell Absent

The system has detected that the bell or siren is not connected.

8.0.2 GROUP [5]: ZONE TAMPER

The numerical LEDs for the zone or zones that have been tampered

with will be illuminated.

8.0.3 GROUP [6]: ZONE LOW BATTERY

If a wireless device's battery needs to be replaced, the numerical

symbols for the zone that it is assigned to will be illuminated. Also,

the yellow light on the device will flash to indicate this trouble.

8.0.4 GROUP [7]: ZONE FAULT

A smoke detector is experiencing a wiring problem, needs to be

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

No comments

SEKURE DGP2-648 User Manual Page 29