GAS ANALYZER 321
4. Insert the probe 12" into the tailpipe of the vehicle.
Insert the end of the sampling probe a minimum of 12" into the tailpipe of the vehicle.
The sampling probe comes with two types of retainers to ensure that the probe stays
inside the tailpipe during use.
5. Route the exhaust and drain hoses to proper ventilation.
Once the analyzer samples the gas, it passes the sample through the exhaust and drain
hoses of the analyzer sampling hose assembly. It is important that this exhaust is
treated the same as the exhaust coming out of the vehicle’s tailpipe. Therefore, proper
routing of the hoses is required for ventilation of the exhaust and drain hoses.
PROBE HANDLE
ASSEMBLY
FLEX-HOSE
FLEXIBLE
TIP PROBE
FLEX-HOSE
FIGURE 5. Insert the Sampling Probe into the Tailpipe for Service Bay Testing
WARNING!
Carbon monoxide gas is poisonous. Vent Gas Analyzer exhaust
hose and vehicle tailpipe to the outside.
Comments to this Manuals