SEKURE DGP2-648 Installation Manual download pdf (Page 25)

DIGIPLEXNE CONTROL PANEL 23

8 EVENT REPORTING

Figure 8-1: Event Reporting

Dialing Enabled/Disabled

Section [3036]

Option [3]

Reporting Account Numbers

Central Station

Telephone Numbers

1 to 4 (32 digits)

Sections [3071] to [3074]

Event Call Direction

Defines to which Central

Station Telephone Number

each specific group of events

will be reported.

Reporting Formats

Section [3070]

First digit = CSTN #1

Second digit =CSTN #2

Third digit =CSTN #3

Fourth digit =CSTN #4

Partition 1

Partition 2

Partition 3

Partition 4

Partition 5

Partition 6

Partition 7

Partition 8

Reporting Account Number 1

3 or 4 digits (0-F) in Section [3061]

Reporting Account Number 2

3 or 4 digits (0-F) in Section [3062]

Reporting Account Number 3

3 or 4 digits (0-F) in Section [3063]

Reporting Account Number 4

3 or 4 digits (0-F) in Section [3064]

Reporting Account Number 5

3 or 4 digits (0-F) in Section [3065]

Reporting Account Number 6

3 or 4 digits (0-F) in Section [3066]

Reporting Account Number 7

3 or 4 digits (0-F) in Section [3067]

Reporting Account Number 8

3 or 4 digits (0-F) in Section [3068]

CSTN = Central Station

Telephone Number

[0]

Ademco Slow

[1]

Silent Knight Fast

[2]

Sescoa

[3]

Ademco Express

[7]

Pager

[6]

SIA FSK

[5]

Ademco Contact I.D.

Pulse

DTMF

(Tone)

Program 2-digit (00-FF)

report codes into:

Sections [0201] to [0296]

Sections [0701] to [0732]

Sections [0801] to [0832]

Sections [2001] to [2099]

Sections [2101] to [2199]

Sections [3900] to [3991]

Sections [4030] to [4037]

Manual & Automatic programming of report codes, refer to:

1) Ademco Contact ID and SIA FSK under Reporting Formats

2) Auto Report Code Programming

Dialing sequences for Arm/Disarm Report Codes

Partition 1 = [3127] Partition 5 = [3527]

Partition 2 = [3227] Partition 6 = [3627]

Partition 3 = [3327] Partition 7 = [3727]

Partition 4 = [3427] Partition 8 = [3827]

Dialing sequences for Alarm/Restore Report Codes

Partition 1 = [3128] Partition 5 = [3528]

Partition 2 = [3228] Partition 6 = [3628]

Partition 3 = [3328] Partition 7 = [3728]

Partition 4 = [3428] Partition 8 = [3828]

Dialing sequences for Tamper/Restore Report Codes

Partition 1 = [3129] Partition 5 = [3529]

Partition 2 = [3229] Partition 6 = [3629]

Partition 3 = [3329] Partition 7 = [3729]

Partition 4 = [3429] Partition 8 = [3829]

Dialing sequence for

Trouble/Restore Report Codes: [3080]

Dialing sequence for

System Special Report Codes: [3081]

[1] = Call Central Telephone 1

[2] =

Call Central Telephone 2

[3] = Call Central Telephone 3

[4] = Call Central Telephone 4

[5] = Backup on Telephone 1

[6] = Backup on Telephone 6

[7] = Backup on Telephone 7

[8] = Backup on Telephone 8

For each section (dialing sequence)

enable up to 4 central station

telephone numbers and 1 backup

telephone number. The numbers are

dialed sequentially from 1 to 4

followed by the backup number. This

sequence will continue until each

number has been dialed at least

once.

Related Features

Delay Before Alarm Transmission: [3055]

Pager Format Delay Transmission: [3057]

Recent Closing Delay

Sections [3109], [3209], [3309], [3409],

[3509], [3609], [3709] and [3809]

Power Failure Report Delay: [3058]

Auto Test Report: [3040] and [3041]

Report Disarm Options

Option [7]: Sections [3123], [3223], [3323],

[3423], [3523], [3623], [3723] and [3823]

Report Zone Restore Options

Section [3037] Option [8]

Alternate Dial

Section [3037] Option [6]

Maximum Dialing Attempt

Section [3056]

Delay Between Dialing Attempts

Section [3054]

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Comments to this Manuals

No comments