SEKURE DGP2-648 Installation Manual download pdf (Page 45)

DIGIPLEXNE CONTROL PANEL 43

2) Using the scroll keys, highlight Bypass and then press the center

action key (Ok).

3) Highlight the zone that you wish to bypass and then press the left

action key (Bypass). Repeat this step for any additional zone.

4) Press the right action key (Back) to save the data.

Users can also activate Bypass Recall. Bypass Recall reinstates all the

zones that were bypassed the last time the partition(s) assigned to the User

Access Code were armed. To activate Bypass Recall, users:

For LCD Keypads:

1) Enter their [

ACCESS CODE].

2) Press the [

BYP] key.

3) Press the [

MEM] key.

4) Press [

ENTER] key to exit.

For Grafica Keypads:

1) Enter their [

ACCESS CODE].

2) Using the scroll keys, highlight Bypass and then press the center

action key (Ok).

3) Highlight Bypass Recall and then press the center action key (Ok).

15.8 CHIME ZONES (UL NOTE: NOT TO BE USED FOR PERIMETER PROTECTION)

The keypads can emit rapid, intermittent beeps whenever designated

zones within their assigned partitions open or when they open during a time

period. The instructions that follow are for LCD Keypads, for Grafica

keypads, refer to the Grafica Online Manual, which can be downloaded for

free from our Web site at www.paradox.ca.

For LCD keypads:

To program a Chime Zone, users:

1) Enter their [

ACCESS CODE].

2) Press the [9] key.

3) Press the [1] key.

4) Enter the zone’s 2-digit number or use the [

S] and [T] keys to scroll

the list and press the [

ACC] key when the zone appears on-screen.

5) Press [

ENTER] key to save.

To program a time period when the Chime Zones are activated, users:

1) Enter their [

ACCESS CODE].

2) Press the [9] key.

3) Press the [2] key.

4) Enter the time that keypads will start beeping when Chime Zones are

opened according to the 24-hour clock (i.e. 9PM is 21:00).

5) Enter the time that keypads will stop beeping when Chime Zones are

opened according to the 24-hour clock (i.e. 9PM is 21:00).

6) Press [

ENTER] key to save.

15.9 KEYPAD SETTINGS

The keypad’s settings can be modified to suit the user’s needs. The

instructions that follow are for LCD and LED keypads only, for Grafica

keypads, refer to the Grafica Online Manual, which can be downloaded for

free from our Web site at www.paradox.ca.

For LCD Keypads:

• Scrolling Speed is how long the messages stay on the LCD screen

before moving to the next message.

• Backlight is the illumination behind the keys and the screen.

• Contrast is how dark the characters appear on the LCD screen.

To change the settings:

1) Enter the [

USER ACCESS CODE].

2) Press [6].

3) Press [1]: Scrolling Speed from 0 to 10 (10 = slowest)

Press [2]: Backlight from 0 to 7 (7 = brightest)

Press [3]: Contrast from 0 to 4 (4 = most contrast)

4) Use the [

S] and [T] keys to increase or decrease the numbers.

5) Press [

ENTER].

6) Press [

CLEAR] to exit or the [T] key to move to the next setting.

For LED Keypads:

Modify Backlight only:

1) Enter an [

ACCESS CODE].

2) Press the [6] key.

3) Use the [

S] and [T] keys to increase or decrease the illumination.

The range is between zero and seven with seven as the brightest ([10]

LED = zero).

15.10 EVENT RECORD DISPLAY

The Event Record Display displays the user-initiated events that occurred

in the system as well as any alarms or troubles. The events from all the

partitions can scroll on the screen or can be viewed by partition. The most

recent event is displayed first. The Event Record Display can only be

viewed through an LCD or Grafica keypad. To view the events:

For LCD Keypads:

1) Enter a User Access Code

2) Press the [7] key

3) Press

4) Press the [

T] key to view subsequent events

5) Press the [

CLEAR] key to exit

Change the order that the Event Record screens appear by pressing the [7]

key. If you already know the number of the event you want to view, press

the

[MEM] key and then enter the event's number.

For Grafica Keypads:

1) Enter their [

ACCESS CODE].

2) Using the scroll keys, highlight View Status and then press the center

action key (Ok).

3) Highlight View Events and then press the center action key (Ok). If

the event list appears on the screen go to step 6.

4) Highlight View All Areas or Select Area(s) and then press the center

action key (Ok).

5) If you selected Select Area(s) in step 4, highlight the area you wish to

view and then press the center action key (Ok).

6) Use the scroll keys to scroll through the events.

15.11 SCROLL RESTART (LCD KEYPAD ONLY)

The keypad scrolls through the status of its assigned partitions. Press the

[

CLEAR] key at any time to return to the beginning of the sequence.

15.12 TROUBLE DISPLAY

When the system experiences problems or is tampered with, the Trouble

Display appears on the LCD screen.

Keypads will only display troubles that

occur in their assigned partition(s). Potential troubles have been sorted into

eight groups. The Group headings are listed below with a brief explanation

of the potential troubles sorted within each group. To view:

To view the Trouble Display on LCD or LED Keypads:

Step 1: Press the [

TRBL] key

Step 2: For LEDs: Press the Numerical Symbol corresponding to the

Group heading to view the specific trouble.

For LCDs: Press the number representing the trouble and press

the [

S] and [T] keys to view the specific trouble.

To view the Trouble Display on Grafica Keypads:

Step 1: Enter your [

ACCESS CODE].

Step 2: Using the scroll keys, highlight Trouble and then press the center

action key (Ok). The trouble(s) will appear by Trouble Group.

Key Displays: Key Displays:

[0] All partitions [5] Partition 5

[1] Partition 1 [6] Partition 6

[2] Partition 2 [7] Partition 7

[3] Partition 3 [8] Partition 8

[4] Partition 4

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Comments to this Manuals

No comments

SEKURE DGP2-648 Installation Manual Page 45

Comments to this Manuals

Related products and manuals for Security access control systems SEKURE DGP2-648