SEKURE DGP2-648 Installation Manual download pdf (Page 31)

DIGIPLEXNE CONTROL PANEL 29

8.16 CLOSING DELINQUENCY TIMER

(Default = 000; Disabled) When a partition in the system is disarmed, the

control panel will start the corresponding partition’s Closing Delinquency

Timer, which is programmed for each partition. If the Closing Delinquency

Timer elapses before the partition is armed again, DigiplexNE will transmit

a “Closing Delinquency” report code to the central monitoring station. Enter

a value from 001 to 255 days into the appropriate section. Enter 000 to

disable the Closing Delinquency Timer.

For example, the Closing Delinquency Timer for partition 1 (section [3119])

is programmed for 005 days. When the system is disarmed, DigiplexNE will

begin the Closing Delinquency Timer for partition 1. If the partition has not

been armed within five days, DigiplexNE will transmit a “Closing

Delinquency” report code to the central monitoring station.

[4035]

Special Arming Report Codes

Special Disarming Report Codes

[3910] to [3919]

[3920] to [3929]

[4036] Special Alarm Report Codes [3930] to [3939]

[4037] Trouble and Restore Report Codes [3940] to [3991]

Partition 1: [3119] Partition 3: [3319] Partition 5: [3519] Partition 7: [3719]

Partition 2: [3219] Partition 4: [3419] Partition 6: [3619] Partition 8: [3819]

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

No comments

SEKURE DGP2-648 Installation Manual Page 31