SEKURE DGP2-648 Installation Manual download pdf (Page 28)

26 REFERENCE & INSTALLATION MANUAL

Close [3916], Late to Close [3917], Early to Open [3926] or Late to Open

[3927]. In the desired section enable options [5] and [6] to enable the

Arming and Disarming Report Schedules:

8.3.2 Arming and Disarming Report Schedules

Arming and Disarming Report Schedules identify the days and times that a

partition should be armed and disarmed. Each partition includes an Arming

Report Schedule and a Disarming Report Schedule. Each schedule

consists of 2 programmable time periods called Intervals that determine the

time span and days when the partition should be armed or disarmed (see

Figure 8-2). To enable the schedules, refer to section 8.3.1.

Figure 8-2: Example of an Arming and a Disarming Report Schedule

In the section that corresponds to the desired partition, program the Start

Time and End Time according to the 24-hour clock and enable the options

representing the desired Days. When option [8] is enabled, access is

permitted during the programmed holidays (see section 13.8).

8.3.3 Arming/Disarming Schedule Tolerance Window

(Default = 000) The Arming/Disarming Schedule Tolerance Window

lengthens the partition’s Arming/Disarming Schedule for some users. User

Access Codes with Add Tolerance Windows to Schedules enabled (refer to

the System Manager’s Manual) have the number of minutes programmed

in these sections added before and after the corresponding partition’s

schedule. This allows certain individuals more flexibility without modifying

all the Schedules.

For example, using Figure 8-2 in section 8.3.2 if 015 is programmed in

section [3104], users with Add Tolerance Windows to Schedules enabled

on their cards can disarm between 8:35 and 9:25 and can arm between

16:40 and 17:45 without the control panel sending the report codes.

Enter any value between 001 and 255 to determine Arming/Disarming

Schedule Tolerance Window in minutes.

The Arming/Disarming Schedule Tolerance Window applies to

the Arming and Disarming Report Schedules only (section

8.3.1 and section 8.3.2). The Arming/Disarming Schedule

Tolerance Window does not

apply to Access Schedules

(section 13.6).

8.4 MONITORING STATION PHONE #

SECTIONS [3071] TO [3074]

The control panel can dial up to 4 different Monitoring Station telephone

numbers. Sections [3071] to [3074] represent Monitoring Station telephone

numbers 1 through 4. Enter any digit from 0 to 9 and any special keys or

functions (see Table 3) up to a maximum of 32 digits. Refer to Event Call

Direction in section 8.8 and Reporting Formats in section 8.7 for details on

how these telephone numbers are used.

Table 3: Special Telephone Number Keys

8.5 ACCOUNT NUMBER

ECTIONS [3061] TO [3068]

(Default = 000) All report codes are preceded by a 3- or 4-digit Account

Number to ensure correct identification of system events. The Account

Number that is transmitted with the report code can correspond either to the

partition or to the central station telephone number (see section 8.6 on

page 27). Account Numbers can be any hexadecimal value from 0 to F.

For example, if the Account Number Transmission (see section 8.6 on page

27) corresponds to the partition, and a zone generates an alarm in Partition

Partition 1: [3122] Partition 3: [3322] Partition 5: [3522] Partition 7: [3722]

Partition 2: [3222] Partition 4: [3422] Partition 6: [3622] Partition 8: [3822]

Option Feature

[5] Arming Report Schedule

[6] Disarming Report Schedule

Arming Report Schedule

Partition 1: [3102] Partition 3: [3302] Partition 5: [3502] Partition 7: [3702]

Partition 2: [3202] Partition 4: [3402] Partition 6: [3602] Partition 8: [3802]

Disarming Report Schedule

Partition 1: [3103] Partition 3: [3303] Partition 5: [3503] Partition 7: [3703]

Partition 2: [3203] Partition 4: [3403] Partition 6: [3603] Partition 8: [3803]

Option Day Option Day

[1] Sunday (S) [5] Thursday (T)

[2] Monday (M) [6] Friday (F)

[3] Tuesday (T) [7] Saturday (S)

[4] Wednesday (W) [8] Holidays (H)

Partition 1: [3104] Partition 3: [3304] Partition 5: [3504] Partition 7: [3704]

Partition 2: [3204] Partition 4: [3404] Partition 6: [3604] Partition 8: [3804]

Function LCD Grafica

* [STAY]

[#]

(Press the key until the

desired letter/symbol

appears)

# [FORCE]

Switch to Tone Dialing (T) [ARM]

Wait for second dial tone (W) [DISARM]

4-second pause (P) [BYP]

Insert [MEM] —

Delete [TRBL] —

Delete from cursor to end [ACC] Left action key (Clear)

Table 4: Account Numbers

Section Account Number

Section [3035],

option [6] = disabled

Section [3035],

option [6] = enabled

[3061] Account Number 1 Partition 1 CSTN 1

[3062] Account Number 2 Partition 2 CSTN 2

[3063] Account Number 3 Partition 3 CSTN 3

[3064] Account Number 4 Partition 4 CSTN 4

[3065] Account Number 5 Partition 5 N/A

[3066] Account Number 6 Partition 6 N/A

[3067] Account Number 7 Partition 7 N/A

[3068] Account Number 8 Partition 8 N/A

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Comments to this Manuals

No comments

SEKURE DGP2-648 Installation Manual Page 28

Comments to this Manuals

Related products and manuals for Security access control systems SEKURE DGP2-648